Setting up a gateway on MacOS

From 44Net Wiki
Revision as of 11:33, 25 July 2019 by WB6CYT (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Note to editor: when this is complete and tested, link to home page.

These are instructions for setting up a MacOS system as a gateway, using the Setting up a gateway on Linux as a starting point.

Before configuring the MacOS gateway you'll need to:

  • Using the Portal, obtain your AMPRnet IP addresses from a regional coordinator.
  • Obtain a public static IP address for your gateway.
  • Using the Portal, create an entry for your gateway.
  • Get some of your AMPRNet IP addresses registered in the ampr.org DNS.