Setting up a gateway on Linux: Difference between revisions

From 44Net Wiki
Jump to navigation Jump to search
(Created page with "There are a few different ways to run an AMPRnet gateway on a Linux system. Each has some benefits, so you'll need to pick your favourite. Before configuring the Linux gatewa...")
 
Line 14: Line 14:


* [[rip44d]] is a new method, using RIPv2 to automatically set up routes
* [[rip44d]] is a new method, using RIPv2 to automatically set up routes
* Downloading the [[encap]].txt file using FTP and setting up routes using a munge script is the traditional method
* Downloading the [[encap]].txt file using FTP and setting up routes using a [[munge script]] is the traditional method


'''Setting up radio interfaces in Linux'''
'''Setting up radio interfaces in Linux'''

Revision as of 05:49, 8 May 2013

There are a few different ways to run an AMPRnet gateway on a Linux system. Each has some benefits, so you'll need to pick your favourite.

Before configuring the Linux gateway you'll need to follow the common instructions for setting up a gateway: Obtain your AMPRnet 44/8 IP addresses from a regional coordinator, obtain a public static IP address for your gateway, insert your gateway in the Gateways database using the Portal and get some of your 44.* IP addresses registered in the ampr.org DNS.

Flavours of Linux gateways

Native Linux kernel AX.25 and IPIP tunneling

Linux contains the necessary building blocks for a gateway without much added software. Radio interfaces are configured much like any other network interfaces such as Ethernet, they're just given amateur radio callsigns in addition to an IP address (callsign will act the role of the Ethernet MAC address). If you're familiar with Linux configuration but have not heard of NOS, or if you wish to go with minimal amount of moving parts, this would probably be your choice.

Setting up a native Linux gateway consists of two main steps:

Setting up tunnel routing to the rest of the AMPRnet

  • rip44d is a new method, using RIPv2 to automatically set up routes
  • Downloading the encap.txt file using FTP and setting up routes using a munge script is the traditional method

Setting up radio interfaces in Linux

  • Linux AX.25 set-up
  • 802.11 WiFi on amateur frequencies (2.4 or 5 GHz) is a new popular way to set up fast links