Ubuntu Linux Gateway Example: Difference between revisions

From 44Net Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 7: Line 7:
# The third connection is used to connect your "ham" devices so they can see and be seen by other AMPRNet devices.
# The third connection is used to connect your "ham" devices so they can see and be seen by other AMPRNet devices.
The following diagram shows the layout of the connections.
The following diagram shows the layout of the connections.
(Click on the image to enlarge).


[[File:AMPRNetGatewayDiagram.png| 200 px]]
[[File:AMPRNetGatewayDiagram.png| 200 px]]

Revision as of 02:30, 26 March 2014

The following are the steps necessary to create a general purpose gateway to AMPRNet using an Ubuntu Linux Server.

Design

The basic design consists of three network connections:

  1. The first connection is to your ISP so you can reach the Internet.
  2. The second connection is used to connect your normal "non-ham" devices.
  3. The third connection is used to connect your "ham" devices so they can see and be seen by other AMPRNet devices.

The following diagram shows the layout of the connections. (Click on the image to enlarge).

Error creating thumbnail: File missing

Prerequisites

Hardware

Software

Other

Installing Required Software

Setting up the ISP (Internet) Interface

Configuring a static address

Testing

Setting up the "Non-Ham" Network Interface

Setting up DHCP

Testing

Setting up the Firewall (Part 1)

Setting up NAT

Protecting the Gateway

Protecting the "Non-Ham" Network

Setting up the Local "Ham" Network (AMPRNet) Interface

Setting up the Tunnel to AMPRNet

Setting up Routing

Setting up Policy Based Routing

Automating Routing Updates with rip44d

Getting rip44d

Compiling and installing rip44d

Setting up the Firewall (Part 2)

Pulling it all together

Next Steps