RIP

Information about other AMPRNet gateways can now be received dynamically via modified RIPv2 advertisements. Previously, routes were obtained by creating a munge script that parsed Encap.txt.

RIP44 Daemons

Two programs are available for GNU/Linux to utilize these updates:

• ampr-ripd, a C based routing daemon
• rip44d, a PERL based routing daemon

Availability/Compatibility

The RIP44 daemons have been tested and known to work on the following operating systems:

• BSD
• OpenWRT/LEDE
• Raspbian
• Slackware Linux
• Ubuntu/Debian Linux
• Vyatta/VyOS

Non-RIP44 Workarounds

The devices below do not possess a known, end-user method to install additional software (i.e. ampr-ripd). Operators have developed scripts to parse inbound routing packets to make them compatible for usage on AMPRNet:

• Cisco IOS (a separate machine must run the script)
• JunOS
• MikroTik : look here http://www.yo2loj.ro/hamprojects/ at the "Mikrotik RIPv2 AMPR Gateway Setup Script 3.0"
• Ubiquiti OS

See Also

• startampr - a script that loads the routing daemon on boot on Linux server-type devices
• Instructions for setting up a tunnel gateway on Linux
• Instructions for setting up a gateway on OpenWRT