44Net Connect Quick Start

Get Started with 44Net Connect

Step 1: Sign in to the Connect dashboard

Visit The 44Net Connect dashboard.
Click the “Log In to Get Started” button.
Sign in with your 44Net Portal account credentials.

New to the Portal? See GetStarted to sign up and get your callsign verified. You must have a verified callsign to use Connect. If you have a callsign but haven't completed verification, please do so before proceeding.

Step 2: Create your first tunnel

On the dashboard page, click the “Create Tunnel” button.
Select an endpoint region and node.
Enter a name for your tunnel, click the “Create Tunnel” button, and confirm.

Don’t worry too much about the endpoint selection. You can change it later if needed, and you can have multiple tunnels to different endpoints if you want. The tunnel name is just for your reference.

Step 3: Get your WireGuard configuration

Scroll down to find your tunnel configuration.
Click the “Copy to Clipboard” button to copy the configuration text.
Paste the configuration into your WireGuard client (Windows, macOS), or save it as a configuration file (e.g. wg0.conf on Linux, cloud instances, etc.).

The configuration includes your public and private keys, an automatically-assigned 44Net address, and the endpoint information. It’s a standard WireGuard config that you can use with any compatible client or device.

Step 4: Activate your tunnel

Start the WireGuard tunnel (“Activate” in the client, or wg-quick up wg0 on Linux).

Once the tunnel is active, your system operates as a native 44Net host. Inbound and outbound traffic is routed through the Connect endpoint, giving your device a direct connection to the Internet.